Welcome Guest [Log In] [Register]
Add Reply
Ca18 Help
Topic Started: Jun 27 2009, 06:11 PM (252 Views)
Philbert

My buddy has a 91 Nissan s13. Came with a DOHC that we've pulled. Here's some info that will maybe help you help us!


Automatic Ca18 with a 5 speed swap,
Auto Ca Harness with a KA lower harness
We have fuel (I installed a walbro 255)
We DONT have spark to the coilpacks
The CAS does have power going to it, So it is working.
It Cranks over just doesn't start.

We even went as far as Trying all the parts in my other buddies ca swapped hatch, And his engine still starts fine, (We swapped ECU's, CAS's, Coil packs, etc)

We checked the plug on the Harness side for power, and we dont have any power going to the coilpacks... So we hardwired the coilpacks with a wire from the battery to the power wire of the coilpacks... and still nothing... So we're really stumped . We've tried 2 different harnesses, And still nothing... Any ideas?

Any ideas would be greatly appreciated. Thanks guys!
Offline Profile Quote Post Goto Top
 
Blake
.
Could it be a ground or something with the harness itself?
Online Profile Quote Post Goto Top
 
Philbert

We've swapped harnesses twice... Still nothing..
Offline Profile Quote Post Goto Top
 
x3whlmotion240
Member Avatar

honestly the best thing to do when fighting with something like this is to pull out the wiring diagram and just fallow back from the coil packs. of course after you have checked your basics.
Offline Profile Quote Post Goto Top
 
Marino.
Member Avatar

Fuse?
Offline Profile Quote Post Goto Top
 
240Smoke
Member Avatar
[]D [] []\/[] []D
bumping old thread, did you ever figure out what was wrong?
Offline Profile Quote Post Goto Top
 
mAc3
Member Avatar
I have serious AMMO.
Have you earthed the neutral switch from the the auto ecu box?? Or did you just rip it out??
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · CA · Next Topic »
Add Reply